{"product_id":"crestron-amp-x75","title":"CTN AMP-X75 X-Series Amplifier, 75 W","description":"\u003cdiv class=\"crestron-product-description\"\u003e\n\u003cp\u003eThe AMP-X75 provides an amplifier solution that saves energy, space, and money. The modular design is easy to configure and ships with everything required to enable surface mounting, rack mounting, and ganging multiple units together.\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv aria-labelledby=\"panel1-label\" class=\"tabs-panel is-active\" id=\"panel1\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-14 medium-9 medium-offset-1 column\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Crestron® AMP-X75 is a high performance, space saving, energy efficient amplifier that’s totally configurable, yet simple to use. Whether you need a stereo amplifier that mounts on a wall or under a table, or a high impedance speaker run fed from a rack mounted unit, the AMP-X75 is simple to specify and install in any configuration.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eLoZ (4\/8 Ω) and Hi-Z (70V or 100V) Output\u003c\/strong\u003e\u003cbr\u003e\nThe AMP-X75 is a 2-channel amplifier (up to 35 W per single‑ended, low impedance channel) which can also be configured for a single channel of bridged operation (up to 75 W for the bridged channel), or for a single channel of high impedance operation (up to 75 W) to drive a distributed speaker system (70V or 100V). Balanced and unbalanced inputs are available for connection to a single stereo or two mono source(s) via detachable terminal blocks or a 3.5 mm TRS connector. Balanced and unbalanced inputs are summed for simultaneous use.\u003cbr\u003e\n\u003cbr\u003e\n\u003cem\u003eNOTE: Each configuration can output up to its respective power rating.\u003c\/em\u003e\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eSolid and Efficient Performance\u003c\/strong\u003e\u003cbr\u003e\nThe AMP-X75 is engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply ensures consistent performance at varying line voltages.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eConvection Cooling\u003c\/strong\u003e\u003cbr\u003e\nThe efficient design ensures cool running operation and long‑term reliability. The AMP-X75 is high-density stackable with other Crestron modular amplifiers, allowing multiple units to be installed vertically in an equipment rack without needing extra ventilation space.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eModular Design\u003c\/strong\u003e\u003cbr\u003e\nThe AMP-X75 is housed in a quarter-width rack-mountable form factor that can be installed individually or ganged together with other units in a single rack space. The amplifier ships complete with all the hardware required for installation. Rack and surface mount parts are included, so there are no other mounting accessories or rack shelves to purchase. Whether mounting in a rack, attaching to a flat surface, or placing on a shelf, it’s easy to combine multiple amplifiers into a single assembly.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eFully Protected\u003c\/strong\u003e\u003cbr\u003e\nThe AMP-X75 features protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. In the case of a shorted speaker line or overheating condition, outputs mute automatically until the fault condition is resolved. In the event of a prolonged fault, such as an internal component failure, the outputs mute instantly and the amplifier shuts down.\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eEnergy Efficient\u003c\/strong\u003e\u003cbr\u003e\nIn addition to its high efficiency operation, the AMP-X75 powers down automatically when no input signal is detected for more than 25 minutes, reducing overall power consumption and heat. The amplifier quickly powers back on the instant an input signal is detected. A remote input can connect to a contact closure to place the amplifier in standby mode.\u003c\/p\u003e\n\n                            \n                                    \u003c\/div\u003e\n\n\n                                     \n                                \u003c\/div\u003e\n\u003cdiv class=\"small-14 medium-4 column medium-offset-1 column end\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"overview_features\"\u003e\n\u003ch5\u003eKey Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1RU surface or rack-mountable power amplifier\u003c\/li\u003e\n\u003cli\u003eQuarter-rack width form factor, gangable with other next generation half- and quarter-rack width form factor Crestron products\u003c\/li\u003e\n\u003cli\u003eConfigurable for either LoZ or Hi-Z operation\u003c\/li\u003e\n\u003cli\u003eConfigurable for 1 x up to 75 W output for Hi-Z or\u003cbr\u003e\n\tBridged or 2 x up to 35 W output for stereo low impedance\u003c\/li\u003e\n\u003cli\u003eLow noise, low distortion, and high headroom\u003c\/li\u003e\n\u003cli\u003eComprehensive fault and speaker protection\u003c\/li\u003e\n\u003cli\u003eCaptive speaker connectors for secure and robust connectivity\u003c\/li\u003e\n\u003cli\u003eSupport for two channels of balanced or unbalanced line inputs\u003c\/li\u003e\n\u003cli\u003eStereo or mono-summed operation\u003c\/li\u003e\n\u003cli\u003eConvection cooled for noiseless operation\u003c\/li\u003e\n\u003cli\u003eStandby functionality turns on amplifier in approximately 0.1 s when input sensing circuitry detects an audio signal\u003c\/li\u003e\n\u003cli\u003eRack and surface mount parts are included\u003c\/li\u003e\n\u003cli\u003eStereo ALS line level output for assistive listening systems\u003c\/li\u003e\n\u003cli\u003eRemote standby feature allows for instant on\/off control over amplifier outputs via a simple contact closure input\u003c\/li\u003e\n\u003cli\u003eFront panel power\/standby, Hi-Z, fault, and signal\/clip indicators\u003c\/li\u003e\n\u003cli\u003eInternal universal 100-240V power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eAudio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"30%\"\u003eInput Signal Type\u003c\/td\u003e\n\u003ctd\u003eBalanced or unbalanced analog line-level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\" colspan=\"2\"\u003eOutput Power\u003cbr\u003e\n\t\t\t \n\t\t\t\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"center\"\u003e\u003cstrong\u003eMode\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth align=\"center\"\u003e\u003cstrong\u003e1 Channel Driven\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth align=\"center\" class=\"end\"\u003e\u003cstrong\u003e2 Channels Driven\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\"\u003eLoZ, 8 ohm (single ended)\u003c\/td\u003e\n\u003ctd align=\"center\"\u003e35 W\u003c\/td\u003e\n\u003ctd align=\"center\" class=\"end\"\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\"\u003eLoZ, 4 ohm(single ended)\u003c\/td\u003e\n\u003ctd align=\"center\"\u003e35 W\u003c\/td\u003e\n\u003ctd align=\"center\" class=\"end\"\u003e35 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\"\u003eLoZ, 8 ohm Bridged\u003c\/td\u003e\n\u003ctd align=\"center\"\u003e75 W\u003c\/td\u003e\n\u003ctd align=\"center\" class=\"end\"\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\"\u003eHi-Z 70V\u003c\/td\u003e\n\u003ctd align=\"center\"\u003e75 W\u003c\/td\u003e\n\u003ctd align=\"center\"\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\"\u003eHi-Z 100V\u003c\/td\u003e\n\u003ctd align=\"center\"\u003e75 W\u003c\/td\u003e\n\u003ctd align=\"center\"\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response \u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20 kHz ±0.5 dB at 1 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-Pass Filter (70V and 100V operation only)\u003c\/td\u003e\n\u003ctd\u003e-3 dB @ 80 Hz, -12 dB\/octave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.1% at 1 kHz @ -3 dB full rated output power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eS\/N Ratio\u003c\/td\u003e\n\u003ctd\u003e \u0026gt;103 dBA, 20 Hz to 20 kHz, balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrosstalk\u003c\/td\u003e\n\u003ctd\u003e -75 dB at 1 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Sensitivity\u003c\/td\u003e\n\u003ctd\u003e1.23 Vrms, +4 dBu balanced;\u003cbr\u003e\n\t\t\t0.316 Vrms, -10 dBV unbalanced;\u003cbr\u003e\n\t\t\tFor 35 W (8 Ohms), 75 W (70V\/100V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e23 dB @ 8 Ohms, Balanced Input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eClipping, over current, under voltage, over temperature, DC offset, extreme high frequency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandby Mode\u003c\/td\u003e\n\u003ctd\u003e25 minutes with no signal present, typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWake Time\u003c\/td\u003e\n\u003ctd\u003e0.1 s typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWake Threshold\u003c\/td\u003e\n\u003ctd\u003e0.44 mV typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eConnectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPEAKER OUTPUT\u003c\/td\u003e\n\u003ctd\u003e(1) 4-pin 5.08 mm pitch, 12A plug with screw locking retainers;\u003cbr\u003e\n\t\t\tPower amplifier output;\u003cbr\u003e\n\t\t\tWire Size: Terminals accept up to 12 AWG (3.31 mm2)\u003cbr\u003e\n\t\t\tNOTE: Output is direct-coupled, not transformer isolated.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003eAUDIO IN (UNBALANCED)\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e(1) 3.5 mm TRS connector, female;\u003cbr\u003e\n\t\t\tUnbalanced line-level audio inputs;\u003cbr\u003e\n\t\t\tMaximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003eAUDIO IN (BALANCED)\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e(2) 3-pin 3.5 mm detachable terminal block;\u003cbr\u003e\n\t\t\tBalanced line-level audio inputs;\u003cbr\u003e\n\t\t\tMaximum Input Level: 7.75 Vrms,+20 dBu;\u003cbr\u003e\n\t\t\tInput Impedance: 20k Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003eALS OUT\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e(1) 3.5 mm connector, female;\u003cbr\u003e\n\t\t\tUnbalanced line level audio output,0.316 Vrms, -10 dBV nominal;\u003cbr\u003e\n\t\t\tMaximum Output Level: 2.24 Vrms,+7 dBV (+9.2 dBu);\u003cbr\u003e\n\t\t\tFixed audio output for assisted listening devices duplicates the summed (Unbalanced + Balanced) audio inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003eREMOTE\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e(1) 2 pin 3.5 mm detachable terminal block;\u003cbr\u003e\n\t\t\tConnect to dry contact closure to place amplifier in standby mode.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003eG\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e(1) 6-32 screw;\u003cbr\u003e\n\t\t\tChassis ground lug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003e100-240V~ 370-200 mA 50\/60 Hz\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e(1) IEC 60320 C14 main power inlet;\u003cbr\u003e\n\t\t\tMates with removable power cord, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eControls and Indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePWR\u003c\/td\u003e\n\u003ctd\u003e(1) White\/Red LED;\u003cbr\u003e\n\t\t\tWhite indicates amplifier is on and ready for use;\u003cbr\u003e\n\t\t\tRed indicates amplifier is in standby\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHI-Z\u003c\/td\u003e\n\u003ctd\u003e(1) White LED;\u003cbr\u003e\n\t\t\tIndicates when Hi-Z mode is enabled (70V or 100V);\u003cbr\u003e\n\t\t\tChannels 1 - 2 are bridged and set to 70V or 100V operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSIGNAL\u003c\/td\u003e\n\u003ctd\u003e(2) White\/Red LEDs (one per input);\u003cbr\u003e\n\t\t\tWhite indicates when an active input signal is presentRed indicates when an active input signal clip\/limiting is present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFAULT\u003c\/td\u003e\n\u003ctd\u003e(2) Red LEDs (one per input);\u003cbr\u003e\n\t\t\tIndicates that the input channel is faulted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGAIN 1-2\u003c\/td\u003e\n\u003ctd\u003e(2) Screwdriver-adjustable, detented rotary controls, one per input channel;\u003cbr\u003e\n\t\t\tAdjusts the input attenuation level for the corresponding amplifier channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModes\u003c\/td\u003e\n\u003ctd\u003e(1) Slide switch;\u003cbr\u003e\n\t\t\tSelects stereo, summed, bridged, 70V, or 100V operation\n\t\t\t\u003cul class=\"bullets\" style=\"padding-left: 20px; margin-top: 0px;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTEREO\u003c\/strong\u003e (LoZ): The input signal received on each channel is sent to its respective output for use in applications where left and right channel separation is required. The two GAIN controls are independently adjustable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSUM\u003c\/strong\u003e (LoZ): The input signals sent to a channel pair (1 + 2) are summed and sent to their respective individual outputs. The two GAIN controls are independently adjustable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBRIDGE\u003c\/strong\u003e (LoZ): The input signals sent to a channel pair (1 + 2) are summed and sent to a bridged output (1 + 2) for use in high-power applications. The GAIN 1 control adjusts the bridged 1 + 2 output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70V\u003c\/strong\u003e (Hi-Z): The input signals sent to a channel pair (1 + 2) are summed and sent to a bridged output (1 + 2) for use in Hi-Z 70V applications. The GAIN 1 control adjusts the bridged1 + 2 output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100V\u003c\/strong\u003e (Hi-Z): The input signals sent to a channel pair (1 + 2) are summed and sent to a bridged output (1 + 2) for use in Hi-Z 100V applications. The GAIN 1 control adjusts the bridged 1 + 2 output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003ePower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain Power\u003c\/td\u003e\n\u003ctd\u003e370-200 mA @ 100-240VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e18.63 W, (2 channels driven at 1\/8th output power, 4 ohms);\u003cbr\u003e\n\t\t\t7.60 W, idle (Hi-Z mode);\u003cbr\u003e\n\t\t\t0.41 W, standby (230VAC\/50 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eEnvironmental\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003e41 to 104°F (5° to 40°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e10% to 90% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Dissipation\u003c\/td\u003e\n\u003ctd\u003e63.6 BTU\/hr @ 4 Ohms, all channels driven at 1\/8th output power;\u003cbr\u003e\n\t\t\t25.9 BTU\/hr, idle (Hi-Z mode);\u003cbr\u003e\n\t\t\t1.4 BTU\/hr in standby\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eConstruction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003eMetal, convection cooled (fan less)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Panel\u003c\/td\u003e\n\u003ctd\u003eMetal, black finish with polycarbonate label overlay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFreestanding, surface mount, or 1\/4 width 1 RU 19 in. rack mountable;Gangable with other Crestron modular AMP series products (adhesive feet, surface mounting, rack mounting, and ganging hardware all included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eDimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e1.75 in. (44 mm) without feet;\u003cbr\u003e\n\t\t\t1.83 in. (46 mm) with feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e4.33 in. (110 mm) without mounting brackets;\u003cbr\u003e\n\t\t\t19.00 in. (483 mm) with mounting brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e8.78 in. (223 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eWeight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e2.1 lb (0.95 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eCompliance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cstrong\u003eRegulatory Model: M201929003\u003c\/strong\u003e\u003cbr\u003e\n\t\t\tUL® Listed for the United States and Canada under UL\/IEC 62368-1. CE compliant for applicable European market requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":67572042400034,"sku":"AMP-X75","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/2228\/6114\/files\/master_photo_a-AMP-X75-Front-Left-View.png?v=1792613036","url":"https:\/\/deputyelectronics.com\/products\/crestron-amp-x75","provider":"Deputy Electronics","version":"1.0","type":"link"}