{"product_id":"crestron-clx-2dimflv8","title":"CTN CLX-2DIMFLV8 8 Channel 0-10V Dimmer Module, 2 Feeds, 120V","description":"\u003cdiv class=\"crestron-product-description\"\u003e\n\u003cp\u003e8 Channel 0-10V Dimmer Module, 2 Feeds, 120V\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv aria-labelledby=\"panel1-label\" class=\"tabs-panel is-active\" id=\"panel1\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-14 medium-9 medium-offset-1 column\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Crestron® CLX-2DIMFLV8 is an eight-channel, two-feed dimmer module designed for 120V lighting system applications. It installs in a \u003ca href=\"\/Products\/Lighting-Environment\/Integrated-Lighting-Systems\/Cabinets-Enclosures\/CAEN-7X2\"\u003eCAEN \u003c\/a\u003e or \u003ca href=\"\/Products\/Lighting-Environment\/Integrated-Lighting-Systems\/Cabinets-Enclosures\/CAEN-5X2-MLO-120-2P\"\u003eCAEN-MLO \u003c\/a\u003e enclosure and provides control of 0-10 Volt dimmable fluorescent ballasts and LED drivers. It can also be used to switch non-dimmable lighting loads. Dual feed capability provides two independent four-channel dimmers in one module space. Each output channel is rated for 16 Amps, with a total module rating of 32 Amps when fed from two separate 20 Amp feeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCentralized Lighting Cabinet Installation\u003c\/strong\u003e\u003cbr\u003e\nCrestron CLX series lighting control modules are designed to be installed in a CAEN or CAEN-MLO wall mount enclosure. Available in a variety of sizes, CAEN and CAEN-MLO enclosures provide a scalable, high-density centralized lighting control solution for any-sized residence or commercial facility. A selection of CLX module types is offered to accommodate a wide range of load types and system configurations.\u003c\/p\u003e\n\u003cp\u003eTermination of high-voltage wiring to the CLX-2DIMFLV8 module is facilitated using a \u003ca href=\"\/Products\/Lighting-Environment\/Integrated-Lighting-Systems\/Terminal-Blocks\/CLT-2DIMFLV8\"\u003eCLT-2DIMFLV8 \u003c\/a\u003e terminal block, which is sold separately to enable termination of the wiring prior to installing the module. This terminal block mounts beside the module within the enclosure. The 0-10V control wires terminate to the front of the module via detachable terminal blocks. Other low-voltage control signals are bussed between each of the modules within an enclosure via a simple 5-wire link (interconnect jumpers included), which terminates to a single terminal block (model \u003ca href=\"\/Products\/Control-Hardware-Software\/Hardware\/Accessories\/CAEN-BLOCK\"\u003eCAEN-BLOCK \u003c\/a\u003e, sold separately) at the bottom of the enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCresnet® Communications\u003c\/strong\u003e\u003cbr\u003e\nThe CLX-2DIMFLV8 interfaces with a Crestron \u003ca href=\"\/Products\/Control-Hardware-Software\/Hardware\/Control-Systems\/CLX-DIN-AP3\"\u003econtrol system \u003c\/a\u003e (a.k.a., control processor or automation processor) via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron lighting dimmers, switches, keypads, shades, thermostats, and other devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmergency Lighting Control\u003c\/strong\u003e\u003cbr\u003e\nThe CLX-2DIMFLV8 is UL® 924 and CSA® C22.2 No. 141-15 listed for use in controlling emergency lighting loads. In the event of a power failure, a contact closure from a power loss sensor (Crestron \u003ca href=\"\/Products\/Lighting-Environment\/Integrated-Lighting-Systems\/Accessories\/GLS-PLS-120-277\"\u003eGLS-PLS-120\/277 \u003c\/a\u003e, sold separately) activates the override mode in the CLX-2DIMFLV8 to turn on each designated lighting load if it is off (assuming line power is supplied by a backup power source). The override dimming level can be preset to any value when commissioning the lighting system, so even if the load is already on prior to a power failure, it will change to the preset level when override mode is activated.\u003c\/p\u003e\n\n                            \n                                    \u003c\/div\u003e\n\n\n                                     \n                                \u003c\/div\u003e\n\u003cdiv class=\"small-14 medium-4 column medium-offset-1 column end\"\u003e\n\u003cdiv class=\"in-the-box\"\u003e\n\u003cdiv\u003e\n\u003cimg alt=\"CrestronHome\" class=\"badge\" src=\"https:\/\/kenticoprod.azureedge.net\/kenticoblob\/crestron\/media\/crestron\/generalsiteimages\/badges\/badge_crestronhome-os.jpg?ext=.jpg\"\u003e\n\u003cimg alt=\"TAA Compliant\" class=\"badge\" src=\"https:\/\/kenticoprod.azureedge.net\/kenticoblob\/crestron\/media\/crestron\/generalsiteimages\/badges\/badge_taa_dark.png?ext=.png\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"overview_features\"\u003e\n\u003ch5\u003eKey Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEight-channel 0-10V dimmer module for residential and commercial lighting applications\u003c\/li\u003e\n\u003cli\u003eInstalls in a Crestron® CAEN or CAEN-MLO enclosure\u003c\/li\u003e\n\u003cli\u003eSupports 0-10V dimmable fluorescent ballasts and LED drivers\u003c\/li\u003e\n\u003cli\u003eAlso supports on\/off switching of non-dimmable lighting loads\u003c\/li\u003e\n\u003cli\u003eSingle or dual feeds — two four-channel dimmers in one module\u003c\/li\u003e\n\u003cli\u003eRated 16 Amps per channel, 32 Amps total (using two 20 Amp feeds), at 120 Volts AC\u003c\/li\u003e\n\u003cli\u003eCustomizable dimming curves via software\u003c\/li\u003e\n\u003cli\u003eArcless switching\u003c\/li\u003e\n\u003cli\u003eBuilt-in air gap relay per channel\u003c\/li\u003e\n\u003cli\u003eClosure-activated override mode\u003c\/li\u003e\n\u003cli\u003eUL® 924 and CSA® C22.2 No. 141-15 listed for emergency lighting control\u003c\/li\u003e\n\u003cli\u003eCrestron system integration via Cresnet®\u003c\/li\u003e\n\u003cli\u003eEasy termination using a CLT-2DIMFLV8 terminal block (sold separately)\u003c\/li\u003e\n\u003cli\u003eCEC Title 24 2013 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable border=\"0\" cellpadding=\"2\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"3\"\u003eLoad Control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\" width=\"25%\"\u003eDimmer Channels\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\" width=\"75%\"\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003eDimmable Load Types\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e0-10 Volt fluorescent ballasts or LED drivers (4-wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eSwitched Load Types\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003eLED, incandescent, fluorescent, magnetic low-voltage, electronic low-voltage, high-intensity discharge (HID)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003ePer Channel Load Rating\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e16 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003ePer Group Load Rating\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003eGroup 1 (Channels 1-4): 16 Amps;\u003cbr\u003e\n\t\t\tGroup 2 (Channels 5-8): 16 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eModule Total Load Rating\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e32 Amps\u003csup\u003e [1]\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eLine\/Load Voltage\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e120 Volts AC, 50\/60 Hz; requires one or two single-phase feeds (may be same or different phases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003e0-10V Output\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e0-10 Volts DC, 100 mA maximum per channel, sink or source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eSCCR\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e30 kA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"3\"\u003eConnections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eVia Terminal Block (sold separately)\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003eLINE 1 – 2: (2) Screw terminals, black, line power feed inputs (per group);\u003cbr\u003e\n\t\t\tSW 1 – 8: (8) Screw terminals, red, switched load outputs (per channel);\u003cbr\u003e\n\t\t\tN IN 1 – 2: (2) Screw terminals, white, line power feed neutrals (per group);\u003cbr\u003e\n\t\t\tN OUT 1 – 8: (8) Screw terminals, white, load neutrals (per channel);\u003cbr\u003e\n\u003cem\u003eNote: Each terminal accepts one 14-10 AWG wire.\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003e1 – 8\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e(8) 2-pin detachable terminal blocks;\u003cbr\u003e\n\t\t\t0-10 Volt dimming control outputs;\u003cbr\u003e\n\t\t\t26 to 12 AWG (0.14 to 2.5 mm²) wire size;\u003cbr\u003e\n\t\t\tFor use with Class 1 or Class 2 wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eModule Interconnect\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(2) 5-pin 0.156 inch headers;\u003cbr\u003e\n\t\t\tCresnet\/Override interconnect ports;\u003cbr\u003e\n\t\t\tEach connects to the adjacent module using the interconnect jumper provided;\u003cbr\u003e\n\t\t\tConnects to a \u003ca href=\"\/Products\/Control-Hardware-Software\/Hardware\/Accessories\/CAEN-BLOCK\"\u003eCAEN-BLOCK\u003c\/a\u003e (sold separately) when installed in the lowest position within the enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"3\"\u003eControls \u0026amp; Indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003ePWR\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(1) Green LED, indicates line power is applied to the LINE 1 terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eNET\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(1) Yellow LED, indicates Cresnet communication with the control system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eSETUP\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(1) Pushbutton and (1) red LED for Cresnet setup using TSID (Touch Settable ID)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003e1 – 8\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e(8) Pushbuttons and (8) red LEDs, each pushbutton toggles the corresponding channel on and off (press and hold to cycle the dimming level up and down), each LED indicates the corresponding load output is energized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"3\"\u003eEnvironmental\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eTemperature\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e32° to 104° F (0° to 40° C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003eHumidity\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e10% to 90% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eHeat Dissipation\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e45 BTU\/hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"3\"\u003eEnclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDValueOdd\" colspan=\"2\"\u003eGray metal, surface mount module with (2) integral mounting flanges;\u003cbr\u003e\n\t\t\tOccupies 1 module space in a \u003ca href=\"\/Products\/Lighting-Environment\/Integrated-Lighting-Systems\/Cabinets-Enclosures\/CAEN-7X2\"\u003eCAEN\u003c\/a\u003e or \u003ca href=\"\/Products\/Lighting-Environment\/Integrated-Lighting-Systems\/Cabinets-Enclosures\/CAEN-5X2-MLO-120-2P\"\u003eCAEN-MLO\u003c\/a\u003e enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"3\"\u003eDimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eHeight\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e7.53 in (192 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameEven\"\u003eWidth\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueEven\"\u003e6.91 in (176 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eDepth\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e3.32 in (85 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"3\"\u003eWeight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDValueOdd\" colspan=\"2\"\u003e3.15 lb (1.43 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"3\"\u003eCompliance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDValueOdd\" colspan=\"2\"\u003eETL Listed for the United States and Canada to UL 924 and CSA C22.2 No. 141. ETL Listed for the United States and Canada to UL 508 and CSA C22.2 No. 14.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":67572199620898,"sku":"CLX-2DIMFLV8","price":762.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/2228\/6114\/files\/master_photo_a-CLX-2DIMFLV8.png?v=1792615812","url":"https:\/\/deputyelectronics.com\/products\/crestron-clx-2dimflv8","provider":"Deputy Electronics","version":"1.0","type":"link"}