{"product_id":"crestron-din-1dimu4","title":"CTN DIN-1DIMU4 4 Channel Universal Dimmer, 1 Feed, DIN Rail Mount","description":"\u003cdiv class=\"crestron-product-description\"\u003e\n\u003cp\u003e4 channels of forward or reverse phase dimmingAuto load detection120 to 240 Volt 50\/60 Hz operationVisit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cdiv aria-labelledby=\"panel1-label\" class=\"tabs-panel is-active\" id=\"panel1\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"small-14 medium-9 medium-offset-1 column\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Crestron® DIN-1DIMU4 is a 4-channel universal lighting control module designed to support dimming of both forward and reverse phase type loads. A single model supports both 120V and 220-240V electronic and magnetic low-voltage, incandescent, neon\/cold cathode, 2-wire dimmable fluorescent, and non-dimmable lighting loads up to 5A per channel, 10A total.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAuto Load Detection\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEach channel of the DIN-1DIMU4 is capable of auto-detecting the dimmable load type connected to it and selecting the appropriate operating mode to control that load. Reverse phase (trailing edge) mode supports incandescent and electronic low-voltage load types, while forward phase (leading edge) mode handles magnetic low-voltage, neon, and other inductive load types. A non-dim mode is also selectable for switching of non-dimmable lighting fixtures. Any channel may be set for any mode, allowing one dimmer module to handle any combination of lighting types on four separately controlled circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhase-Synchronous Detection Circuitry\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eProprietary zero cross filter technology provides superior immunity to noise on the power line, reducing lamp flicker, and compensating for fluctuations in line voltage and frequency.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShort Circuit Protection\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt-in OCP (overcurrent protection) prevents failure of the DIN-1DIMU4 caused by excessive loading or improper wiring of the outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePrimary Air-Gap Relay\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eWhen all four channels are turned fully off, the internal master relay automatically opens providing air-gap isolation to allow safe servicing and changing of light bulbs on all four controlled circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOverride Input\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAn override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDIN Rail Installation\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe DIN-1DIMU4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-1DIMU4's front panel stays accessible while the connections are concealed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCresnet® Wired Communication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe DIN-1DIMU4 communicates with a Crestron® \u003ca href=\"https:\/\/www.crestron.com\/Products\/Control-Hardware-Software\/Hardware\/Control-Systems\"\u003eControl System\u003c\/a\u003e using the Cresnet control network. A pair of Cresnet ports is provided on the DIN-1DIMU4 allowing for easy daisy-chaining of several DIN Rail Series automation control modules.\u003c\/p\u003e\n\n                            \n                                    \u003c\/div\u003e\n\n\n                                     \n                                \u003c\/div\u003e\n\u003cdiv class=\"small-14 medium-4 column medium-offset-1 column end\"\u003e\n\u003cdiv class=\"in-the-box\"\u003e\n\u003cdiv\u003e\n\u003cimg alt=\"CrestronHome\" class=\"badge\" src=\"https:\/\/kenticoprod.azureedge.net\/kenticoblob\/crestron\/media\/crestron\/generalsiteimages\/badges\/badge_crestronhome-os.jpg?ext=.jpg\"\u003e\n\u003cimg alt=\"TAA Compliant\" class=\"badge\" src=\"https:\/\/kenticoprod.azureedge.net\/kenticoblob\/crestron\/media\/crestron\/generalsiteimages\/badges\/badge_taa_dark.png?ext=.png\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv class=\"overview_features\"\u003e\n\u003ch5\u003eKey Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of forward or reverse phase dimming\u003c\/li\u003e\n\u003cli\u003eAuto load detection\u003c\/li\u003e\n\u003cli\u003e120 to 240 Volt 50\/60 Hz operation\u003c\/li\u003e\n\u003cli\u003eSelectable non-dim mode\u003c\/li\u003e\n\u003cli\u003eExtreme stability in noisy environments\u003c\/li\u003e\n\u003cli\u003eShort circuit and overcurrent protection\u003c\/li\u003e\n\u003cli\u003ePrimary air-gap relay\u003c\/li\u003e\n\u003cli\u003eOverride input\u003c\/li\u003e\n\u003cli\u003eCresnet® wired communications\u003c\/li\u003e\n\u003cli\u003eSetup via front panel or software\u003c\/li\u003e\n\u003cli\u003eProgrammable functionality using a Crestron® \u003ca href=\"https:\/\/www.crestron.com\/Products\/Control-Hardware-Software\/Hardware\/Control-Systems\"\u003eControl System\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e12M wide DIN rail mounting\u003c\/li\u003e\n\u003cli\u003eCEC Title 24 2013 Compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003ePower\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eLine Power\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e120 - 240VAC, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eInput Channels\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eLoad Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eDimmer Channels\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eMaximum Per Channel\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e5A @ 120 to 240VAC, 50\/60 Hz;\u003cbr\u003e\n\t\t\t600 W @ 120VAC;\u003cbr\u003e\n\t\t\t1150 W @ 230VAC;\u003cbr\u003e\n\t\t\t1200 W @ 240VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eModule Total\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e10A @ 120 to 240VAC, 50\/60 Hz;\u003cbr\u003e\n\t\t\t1200 W @ 120VAC;\u003cbr\u003e\n\t\t\t2300 W @ 230VAC;\u003cbr\u003e\n\t\t\t2400 W @ 240VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eLoad Types\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003eForward Phase (leading edge) or Reverse Phase (trailing edge) Electronic Low Voltage, Incandescent, Neon\/Cold Cathode, Magnetic Low Voltage, Dimmable 2-Wire Fluorescent, and Non-Dim Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eMinimum Load\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e15 W per channel for Incandescent loads;\u003cbr\u003e\n\t\t\t50 W per channel for Magnetic Low Voltage loads with Halogen or LED Lamps;\u003cbr\u003e\n\t\t\t50 W for AC Dimmable LED loads operated in Auto\/Forward-Phase Mode;\u003cbr\u003e\n\t\t\t15 W for AC Dimmable LED loads operated in Reverse-Phase Mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eCommunications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eCresnet\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003eCresnet secondary mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eConnectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eNET\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(2) 4-pin 3.5 mm detachable terminal blocks, paralleled;\u003cbr\u003e\n\t\t\tUses 0.6 W (0.03A @ 24VDC) when line power is not available;\u003cbr\u003e\n\t\t\tCresnet® secondary port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eOVERRIDE\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(2) 2-pin 3.5 mm detachable terminal blocks, paralleled;\u003cbr\u003e\n\t\t\tSensing input for external low-voltage contact closure;\u003cbr\u003e\n\t\t\tActivates override mode when a closure is present;\u003cbr\u003e\n\t\t\tMinimum Closure Rating: 10mA (per module) at 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eLIVE\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(2) Captive screw terminals, brown;\u003cbr\u003e\n\t\t\tLine power connections;\u003cbr\u003e\n\t\t\tAccept up to 12 AWG (2.5 mm²) wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eNEUTRAL\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(5) Captive screw terminals, blue;\u003cbr\u003e\n\t\t\tNeutral connections;\u003cbr\u003e\n\t\t\tAccept up to 12 AWG (2.5 mm²) wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eDIMMED LIVE 1 – 4\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(4) Captive screw terminals, red;\u003cbr\u003e\n\t\t\tDimmer channel outputs 1 - 4;\u003cbr\u003e\n\t\t\tAccept up to 12 AWG (2.5 mm²) wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eGround\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(5) Captive screw terminals, green;\u003cbr\u003e\n\t\t\tGround connections;\u003cbr\u003e\n\t\t\tAccept up to 12 AWG (2.5 mm²) wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eControls and Indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eNET ID\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(2) 7-Segment green LED digits and (2) miniature pushbuttons;\u003cbr\u003e\n\t\t\tFor setting Cresnet ID; digits also display output levels and protection\/error codes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eSETUP\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(1) Red LED and (1) recessed miniature pushbutton;\u003cbr\u003e\n\t\t\tFor enabling setup mode and touch-settable ID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eOVR\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(1) Red LED and (1) miniature pushbutton;\u003cbr\u003e\n\t\t\tFor enabling override mode and saving override presets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003ePWR\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(1) Green LED;\u003cbr\u003e\n\t\t\tLights to indicate AC line power is connected to either LIVE terminal, flashes when only powered by Cresnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eNET\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(1) Yellow LED;\u003cbr\u003e\n\t\t\tIndicates communication with the control processor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eRESET\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(1) Recessed miniature pushbutton;\u003cbr\u003e\n\t\t\tResets internal processor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eFWD 1 – 4\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(4) Red LEDs;\u003cbr\u003e\n\t\t\tLights when a corresponding channel is operating in forward-phase mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eREV 1 – 4\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(4) Red LEDs;\u003cbr\u003e\n\t\t\tLights when a corresponding channel is operating in reverse-phase mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eAUTO 1 – 4\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(4) Red LEDs;\u003cbr\u003e\n\t\t\tLights when a corresponding channel is set to auto-detect the load type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eNON-DIM 1‑4\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(4) Red LEDs;\u003cbr\u003e\n\t\t\tLights when a corresponding channel is operating in non-dim mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eChannel Mode Select 1‑4\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(4) Recessed miniature pushbuttons;\u003cbr\u003e\n\t\t\tUsed to select each channel’s operating mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eLOADS 1 – 4\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e(4) Red LEDs and (4) miniature pushbuttons;\u003cbr\u003e\n\t\t\tStatus indication and local control of each channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eEnvironmental\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eTemperature\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e32° to 104°F (0° to 40°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eHumidity\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e10% to 90% RH (noncondensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eHeat Dissipation\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e60 BTU\/hr @ 240V with 2 channels at 5A\u003cbr\u003e\n\t\t\t50 BTU\/hr @ 120V with 2 channels at 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eConstruction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eEnclosure\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003eAluminum with polycarbonate label overlay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eMounting\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e\n\u003cp\u003e35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 12 DIN module spaces (216 mm)\u003c\/p\u003e\n\t\t\tSufficient ventilation is required to maintain an ambient temperature not exceeding 104°F (40°C), the unit dissipates significant heat when fully loaded;\u003cbr\u003e\n\t\t\tMaintain 4 in. (102 mm) spacing (minimum) or 6 in. (153 mm) spacing (recommended) above and below for proper ventilation and heat dissipation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eDimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eHeight\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e3.71 in (95 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eWidth\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e8.48 in (216 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDNameOdd\"\u003eDepth\u003c\/td\u003e\n\u003ctd class=\"productSpecTDValueOdd\"\u003e2.35 in (60 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eWeight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDValueOdd\" colspan=\"2\"\u003e2.23 lb (36 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDHead\" colspan=\"2\"\u003eCompliance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"productSpecTDValueOdd\" colspan=\"2\"\u003e\n\u003cp\u003eFCC Part 15 Class B, IC Class B, CE, UL® Listed for US and Canada\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Crestron","offers":[{"title":"Default Title","offer_id":67572277936418,"sku":"DIN-1DIMU4","price":912.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/2228\/6114\/files\/master_photo_a-din-1dimu4.png?v=1792617541","url":"https:\/\/deputyelectronics.com\/products\/crestron-din-1dimu4","provider":"Deputy Electronics","version":"1.0","type":"link"}